: sod-123fl molded suface mount high efficiency rectifier diodes uf07m uf07k uf07j uf07g uf07d UF07B uf07a uf07a - uf07m 0.7 50 75 100.0 5.0 1.7 1.4 1.0 plastic body over passivated junction voltage range: 50 - 1000v method 2026 : color band denotes cathode end : any :0.0007 ounce, 0.02 grams glass passivated device ideal for surface mouted applications metallurgically bonded construction high temperature soldering guaranteed: 250 c/10 seconds,0.375 ? (9.5mm) lead length, 5 lbs. (2.3kg) tension low reverse leakage case terminals polarity mounting position weight : plated axial leads, solderable per mil-std-750, features mechanical data ! ! ! ! ! ! ! ! ! ! ! ! a m c ns 700 1000 v rrm v rms v dc i (av) i fsm v f 25.0 maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a =65 c (note 1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0a maximum dc reverse current t a =25 c at rated dc blocking voltage t a =125 c i r t l =25 c maximum reverse recovery time (note 2) operating junction and storage temperature range t j , t stg -50 to +150 trr 70 100 280 400 140 200 420 600 560 800 35 50 50 100 200 400 600 800 1000 maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. note: 180 k/w 3.measured at 1mhz and applied reverse voltage of 4.0v d.c. 1.averaged over any 20ms period. 2.measured with if=0.5a, ir=1a, irr=0.25a. 4.thermal resistance junction to ambient, 6.0 mm2 coppeer pads to each terminal. typical thermal resistance (note 4) r q ja current: 0.7 a characteristic symbol unit v v v a a v 1 of 2 www.sunmate.tw 3.58 3.72 0.55 0.57 0.53 0.15 0.17 0.13 e d 1.00 1.03 0.097 1.05 1.08 1.02 1 1.80 1.83 1.77 2.75 2.78 2.72 a 3.65 3 sod-123fl dim min max typ b c h l all dimensions in mm a e l b c e h d
1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 0.2 0.6 1.0 1.4 1.8 2.0 fig. 3-typical instantaneous forward characteristics fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes instantaneous forward current,amperes peak forward surge current, amperes instantaneous forward voltage, volts single phase half wave 60hz resistive or inductive load 0.01 0.1 1 20 10 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes ambient temperature, c t j =25 c pulse width=300 m s 1%duty cycle uf07a-uf07d uf07g uf07j-uf07m 30 25 20 15 10 5.0 0 number of cycles at 60 hz 1 10 100 8.3ms single half sine-wave (jedec method) ratings and characteristic curves uf07a thru uf07m 2 of 2 www.sunmate.tw
|
